| LED Status | Meaning | Action | | :--- | :--- | :--- | | | Unit is Enabled & Ready | Normal operation. | | Solid OFF | Unit Disabled | Check inhibits or power supply. | | 1 Flash | Bill Jam | Open unit, remove jam, close. | | 2 Flashes | Stacker Full | Remove stacker, empty bills, reinstall. | | 3 Flashes | Stacker Missing/Not Locked | Ensure stacker is clicked into place. | | 4 Flashes | Transport Error / Sensor Dirty | Clean sensors with compressed air or a soft cloth. | | 5 Flashes | Validator Failure | Internal hardware error; may require service. | 4. Programming (DIP Switches) Note: The location of DIP switches varies by specific sub-model, but they are typically found on the side of the main board or under a cover. Cadence Allegro Free Physical Viewer 16.6 Download Apr 2026
The Gen 5 uses DIP switches to set communication protocols and acceptance modes. Download Private Teacher Hd Movies - 3.79.94.248