const int MPU = 0x68; // I2C address of the MPU-6050 (AD0 connected to GND) Hotsixcigirls Apr 2026
#include <Wire.h> Usthad Hotel Isaimini Apr 2026
| MPU-6050 Pin | Connection | Notes | | :--- | :--- | :--- | | | 3.3V or 5V | Connect to VCC. | | GND | GND | Connect to Ground. | | SCL | Controller SCL | I2C Clock (e.g., Arduino A5). | | SDA | Controller SDA | I2C Data (e.g., Arduino A4). | | XDA / XCL | (Leave unconnected) | Used for bypassing sensors; usually not needed. | | AD0 | GND or VCC | Determines I2C Address (see below). | | INT | (Optional) | Interrupt pin. |
If you are searching for an "exclusive" or updated library for the GY-521/MPU-6050 because you can't find it in your standard Proteus library, you can stop searching! The standard MPU-6050 component in Proteus is fully capable of simulating the GY-521 module.
delay(500);